Wondermask P Peelable Solder Mask

2211-5G; 5 Gallons

Techspray's original synthetic latex peelable solder mask

Features & Benefits

• Non-ammoniated

• Non-flammable

• Non-ozone depleting

• Easily peelable

• Low odor

• Cure indicator : darkens as it cures

• Compatible with gold and copper leads

• Non-corrosive

Instructions

Apply a 20 to 30 mil coating for best results to desired area. The substrate should be free from grease, oil, and particulates. Drying times depend on ambient humidity. Under normal conditions, WonderMASK P is ready for preheating stage in 1 hour, however, cure can be accelerated to 30 minutes at 65°C/150°F or 20 minutes at 82°C/180°F. Do not over cure, as blistering of mask can occur, causing removal problems. Mask will change from an opaque pink to a translucent red when complete cure is accomplished. Mask does not have to be completely cured to withstand soldering operation; however, it should be completely translucent before removal.